China PTO Drive Shaft Kancil 850 Auto Gearbox Male Shaft with Top Quality Low Price
Introduction
The China PTO Drive Shaft Kancil 850 Auto Gearbox Male Shaft is a high-quality product produced by the EVER-POWER GROUP, which is one of the largest agricultural gearbox and PTO factories in China. This product is designed for connecting equipment pumps to farm tractor power take-offs (PTO). The output speed of power take-offs is 540rpm which can be compared to the correct running speeds of hydraulic pumps. This product can be used in supporting machinery, mechanical cultivation, harvesting equipment and accessories.
Product Overview
The PTO gearbox is equivalent to the Brevini ML52 male shaft. The gearbox is made up of gears, shafts, lubrication, and maintenance.
Gears
The gears are made in Steel UNI 18 PCR M03. Stub teeth ensure extremely high resistance and run very quietly.
Shafts
The shafts are made in steel UNI 16 CRN4. They are coupled with splined gears and are designed to withstand the torque values stated in the catalogue.
Lubrication
SAE 90 gear oil must be set in the PTO gearbox before use. Change the oil after the first 60-80 hours and then every 12 months or 1500 hours which at any time falls first.
Maintenance
Please check the oil level through the specific oil window every 50 hours. Operating temperatures should not exceed 120 degrees Celsius under continuous duty cycle.
Packaging & Shipping
The China PTO Drive Shaft Kancil 850 Auto Gearbox Male Shaft is packed in plastic bags for one or two pieces in one exporting carton. 100 cartons are put on a pallet.
Promotion
The EVER-POWER GROUP offers quality products, favorable prices, and attentive service. Customers are welcome to visit and customize with pictures or samples.
FAQs
- What is the PTO gearbox equivalent to?
- What are the gears made of?
- What are the shafts made of?
- What is the recommended lubrication for the PTO gearbox?
- How often should I change the oil in the PTO gearbox?
The PTO gearbox is equivalent to the Brevini ML52 male shaft.
The gears are made in Steel UNI 18 PCR M03.
The shafts are made in steel UNI 16 CRN4.
SAE 90 gear oil must be set in the PTO gearbox before use.
You should change the oil after the first 60-80 hours and then every 12 months or 1500 hours which at any time falls first.
Please note that all the content on this page is from the Internet. The content is only meant as a reference for product selection. We are not the original trademark holder, and our products are only applicable to aftermarket replacement parts rather than original parts. If you need to buy original spare parts, please contact the original factory to buy.