Tag Archives: China full gear coupling

Full China in Jerusalem Israel rubber coupling gearbox near me shop Automatic in Ouagadougou Burkina Faso lovejoy gear coupling near me Industrial Wood Pellet Mill Horizontal with top quality lowest price

Introduction

The full automatic industrial wood pellet mill horizontal is a high-quality and efficient machine that compresses dry sawdust into pellets without using any binder. It is suitable for large-scale production and is designed to make the biomass wood raw material into wood pellets. With the use of this machine, raw materials such as wood logs, chips, branches, sawdust, shavings, agriculture biomass waste (rice straw, wheat straw, cotton straw, rice husk, corn stalk, sunflower stalk, etc.), peanut shell, leaves, bamboo sawdust, sugar cane, waste paper, grass, etc. can be compressed into pellets. The pellets produced by this machine have diameters ranging from ø6-10 mm and can be adjusted according to specific requirements.

Usage Scenarios

The full automatic industrial wood pellet mill horizontal is commonly used in industries such as biomass fuel, chemical, and environmental protection. It is suitable for large-scale production of biomass pellets and is widely used in power plants, industrial boilers, and household heating.

Product History and Categorization

The full automatic industrial wood pellet mill horizontal was developed in response to the growing demand for eco-friendly and sustainable fuel sources. It falls under the category of biomass pellet machines and is specifically designed to compress wood sawdust into pellets.

Benefits

The full automatic industrial wood pellet mill horizontal offers numerous benefits, including high productivity and efficiency, low noise, and stable transmission. Its feeder is driven by a variable frequency motor that ensures feed evenly, and its ring die adopts the hoop fastening method, increasing the speed of discharge. The gear-driving and couping fastening design of the machine’s ring die type leads to a 10-15% higher output than belt-transmission structures.

Materials

The full automatic industrial wood pellet mill horizontal can compress a variety of materials into pellets, including wood logs, chips, branches, sawdust, shavings, agriculture biomass waste (rice straw, wheat straw, cotton straw, rice husk, corn stalk, sunflower stalk, etc.), peanut shell, leaves, bamboo sawdust, sugar cane, waste paper, and grass.

Installation, Maintenance, and Repair

To install the full automatic industrial wood pellet mill horizontal, first, ensure that the machine is placed on a level surface. Then, connect the power supply, and turn on the machine. To maintain the machine, regularly inspect and clean the machine’s parts, including the feeder and ring die. Replace any damaged or worn parts immediately to avoid further damage to the machine. For repair, contact a professional mechanic or the manufacturer.

Promotion

At EVER-POWER GROUP, we are committed to providing quality products, favorable prices, and attentive service. We welcome customers from all over the world to visit our factory at any time to learn more about our products and customize their orders according to their specific needs.

FAQ

  • Q: What is the suitable moisture range for raw materials for the full automatic industrial wood pellet mill horizontal?
  • A: The ideal moisture range is from 15% to 18%.
  • Q: What is the diameter range of the wood pellet produced by the full automatic industrial wood pellet mill horizontal?
  • A: The wood pellet diameter range is ø6-10 mm by using different ring die molds.
  • Q: How do I install the full automatic industrial wood pellet mill horizontal?
  • A: First, ensure that the machine is placed on a level surface. Then, connect the power supply, and turn on the machine.

All content on this page is from the Internet and is only intended as a reference for product selection. EVER-POWER GROUP is not the original trademark holder, and our products are only applicable to aftermarket replacement parts rather than original parts. If you need to buy original spare parts, please contact the original factory to buy.

Gear China in Barquisimeto Venezuela (Bolivarian Republic of) ameridrive coupling supplier Coupling in Malappuram India full gear coupling factory Giicl Series with top quality lowest price

Gear China in Barquisimeto Venezuela (Bolivarian Republic of) ameridrive coupling supplier Coupling in Malappuram India full gear coupling factory Giicl Series with top quality lowest price

We – EPG Group the greatest couplings and gears manufacturing facility in China with five various branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Programs Producers install adaptable shaft couplings in rotary gear and equipment in order to hook up rotary gear to shafts and transfer torque. Illustrations of this sort of machinery and products factors include driveshafts, line shafts, electricity transmissions, wheels, and more. They also do items like isolate propeller pulse, dampen driveline vibration, and tranquil gear chatter. China equipment coupling sliding velocity EPG is one particular of the biggest makers in China. We have advanced equipment for production and new technology tests ability . Via adopting new engineering from British, German, U.S.A, our items are ideal sellers all above European, The united states, and Southeast Asia. Curved tooth equipment coupling collection coupling outer tooth can be good and adverse assembly to get the three diverse axial distance, practical for client use
to restore the tooth crest, support to improve the meshing overall performance, eradicate the load of tooth tip, but also reduce the hole and radial hole and increase the transmission security.
The identical specifications areas is interchangeable , to improve the production and use
SuyeTT coupling with special surface treatment or coating security, to enhance its corrosion resistance
In get to ensure the most simple assembly and disassembly, Fasteners galvanized perform, in get to stop the corrosion and not able to tear open outfit
SuyeTT coupling goods completely produced by by themselves, to totally assure the high quality and supply time, the greatest item integrity and the most benefit of the value

 

Dimension Torque Max Bore Dimesion in mm Bodyweight Grease
Nm RPM max min A B C D F H J M Gap KG KG
G2001 710 7000 50 thirteen a hundred and fifteen 89 forty three sixty nine eighty four 14 39 fifty one 3 four.six .04
G2002 1800 6500 sixty five 20 149 102 forty nine 86 one zero five 19 forty eight sixty one 3 nine.one .07
G2003 4000 6300 78 26 178 127 62 a hundred and five 127 19 59 77 three 16 .113
G2004 7500 4000 98 32 213 159 seventy seven 131 155 21.8 72 92 five 30 .22
G2005 15000 3800 111 39 240 188 ninety one 152 one hundred eighty 21.eight eighty four 107 5 44 .36
G2006 20000 3350 134 51 280 219 106 178 211 28.4 98 a hundred thirty six 69 .55
G2007 30000 2500 a hundred and sixty 64 318 247 121 210 245 28.4 111 145 6 ninety eight .9
G2008 42000 2100 183 seventy seven 346 278 135 235 274 28.4 123 166 eight a hundred and forty one
G2009 50000 2000 two hundred 89 389 314 153 254 206 38.one 141 183 eight two hundred one.77
G2010 71000 1850 220 102 425 344 168 279 334 38.one 158 204 8 355 2.22
G2011 90000 1750 244 a hundred and fifteen 457 384 188 305 366 twenty five.four 169 229 8 310 2.eighteen
G2012 112000 1650 264 one hundred twenty 497 424 207 321 396 28.4 175 247 10 498 3.seven
G2013 180000 1500 289 127 527 452 220 356 425 28.four 196 267 10 608 4.35
G2014 250000 1300 321 135 580 496 241 430 522 35 210 301 twelve 799 five.9
G2015 355000 1200 365 one hundred forty five 644 534 260 490 582 35 230 330 12 1176 eight.3
G2016 500000 1050 401 155 726 574 278 540 654 42 245 358 16 1698 ten.nine
G2017 560000 950 454 one hundred sixty five 775 616 299 580 695 forty two 258 389 16 1959 13.eight

Size Torque Max Bore Dimesion in mm Bodyweight Grease
Nm RPM max min A B C D F H J L M Q Hole KG KG
G2101 710 7000 fifty 13 a hundred and fifteen 89 forty three sixty nine 84 fourteen 39 38  fifty one 38.9844 3 four.six .03
G2102 1800 6500 65 twenty 149 102 49 86 one zero five 19 forty eight 48  sixty one 48.9804 three 9.1 .06
G2103 4000 6300 78 26 178 127 62 one zero five 127 19 fifty nine 61  seventy seven 61.9752 3 sixteen .09
G2104 7500 4000 98 32 213 159 seventy seven 131 one hundred fifty five 21.eight 72 75  92 seventy six.9692 five 28 .eighteen
G2105 15000 3800 111 39 240 188 91 152 a hundred and eighty 21.eight eighty four 89  107 91.8554 five 45 .29
G2106 20000 3350 134 fifty one 280 219 106 178 211 28.four 98 104  130 106.9964 six sixty nine .45
G2107 30000 2500 160 sixty four 318 247 121 210 245 28.4 111 119  one hundred forty five 122.1374 six 103 .78
G2108 42000 2100 183 seventy seven 346 278 a hundred thirty five 235 274 28.4 123 132  166 136.269 8 one hundred forty five .82
G2109 50000 2000 200 89 389 314 153 254 206 38.1 141 150  183 a hundred and fifty five.9376 8 207 1.42
G2110 71000 1850 220 102 425 344 168 279 334 38.1 158 165  204 171.2256 eight 378 one.eighty five
G2111 90000 1750 244 115 457 384 188 305 366 twenty five.four 169 184  229 191.6096 eight 335 2.eighteen
G2112 112000 1650 264 120 497 424 207 321 396 28.four one hundred seventy five 203  247 210.9744 ten 524 two.97
G2113 180000 1500 289 127 527 452 220 356 425 28.four 196 216  267 226.38 ten 745 3.88
G2114 250000 1300 321 135 580 496 241 430 522 35 210 236  301 247.989 twelve 974 four.eighty five
G2115 355000 1200 365 145 644 534 260 490 582 35 230 255  330 267.fifty four twelve 1465 7.6
G2116 500000 1050 401 155 726 574 278 540 654 42 245 272  358 288.7864 sixteen 1985 nine.two
G2117 560000 950 454 one hundred sixty five 775 616 299 580 695 42 258 293  389 310.6012 16 2214 ten.five

 

Dimension NOMINAL Max Rotation GENERAL DIMENSIONS Weight Fat Moment of Grease
Torque Torque limit In mm Max Min Inertia Fat
Nm Nm 1/ min A D B Bore C Hole M Kg Kg J (Kgm2 Kg
G2501 500  one.000  12.000  56  36  47  8-22 30  4  57  ,88 ,73 ,0003 ,01
G2502 650  one.300  ten.500  70  48  56  ten-32 40  4  71  one,eighty 1,34 ,001 ,015
G2503 750  one.500  9.500  80  56  68  fourteen-38 45  4  84  2,71 2,02 ,002 ,025
G2504 one.150  two.300  nine.000  96  68  74  eighteen-50 55  6  91  4,sixty eight 3,twenty ,005 ,04
G2505 2.150  4.300  7.000  112  80  85  20-58 70  6  108  7,eighty four 5,28 ,011 ,05
G2506 four.200  8.400  5.600  140  101  106  twenty-seventy five 80  6  130  14,88 nine,sixty five ,033 ,05
G2507 7.200  14.400  four.700  164  124  116  twenty five-ninety five 95  8  145  24,forty one 14,51 ,073 ,06
G2508 eleven.700  23.400  four.200  185  143  120  30-a hundred and five 105  8  150  34,10 twenty,84 ,128 ,10
G2509 17.200  34.400  3.600  215  170  130  35-130 120  8  165  fifty three,56 29,seventy one ,270 ,12
G2510 27.500  fifty five.000  3.150  255  205  150  45-150 135  10  195  85,52 fifty one,29 ,622 ,15
G2511 38.000  76.000  2.860  280  216  170  fifty five-165 150  10  215  109,sixty six 64,70 ,963 ,35
G2512 fifty one.200  102.400  two.580  317  250  190  sixty-a hundred ninety 170  10  245  163,18 ninety four,fifty six 1835 ,45
G2513 67.300  134.600  2.320  345  275  210  70-210 185  12  275  213,28 122,32 2873 ,5
G2514 88.000  176.000  2.200  374  300  226  one hundred-230 200  12  295  260,76 152,57 4263 ,eight
G2515 134.500  269.000  2.000  414  340  266  a hundred and fifteen-260 230  12  355  374,87 217,forty six 7659 1,5
G2516 a hundred and eighty.000  360.000  one.800  465  370  275  one hundred forty-280 250  16  345  446 355 eleven,12 3,5
G2517 250.000  five hundred.000  one.600  505  410  295  a hundred and sixty-310 270  16  375  558 441 sixteen,21 three,9
G2518 320.000  640.000  one.500  548  450  315  one hundred eighty-345 290  16  400  712 557 twenty five four,eight
G2519 four hundred.000  800.000  one.400  588  490  350  210-370 325  20  450  906 720 37,5 six,
G2520 510.000  one.020.000 one.300  640  520  370  230-390 345  20  480  one.1 889 53,twenty five eight,eight
G2521 660.000  1.320.000 one.200  690  560  390  250-420 365  20  510  1.36 one.104 77,5 nine,five
G2522 780.000  1.560.000 1.100  730  600  430  275-460 400  20  560  1.715 1.38 114 11
G2523 one.000.000 two.000.000 1.050  780  650  440  three hundred-five hundred 410  25  570  one.958 1.554 146 twelve,five
G2524 1.200.000 2.four hundred.000 950.000  850  710  460  325-550 430  25  600  2.464 one.942 218 seventeen
G2525 1.600.000 three.200.000 900.000  910  760  500  350-590 470  25  660  three.05 two.396 308 22
G2526 1.800.000 three.600.000 850.000  970  810  530  375-620 500  30  700  three.seventy two 2.969 430 24
G2527 1.900.000 three.800.000 800.000  1  840  550  four hundred-650 520  30  730  4.16 three.318 532 thirty
G2528 2.a hundred.000 4.200.000 750.000  1  890  574  425-680 540  30  755  four.seventy two 3.782 668 38
G2529 2.600.000 five.two hundred.000 seven hundred.000  1  950  604  450-730 570  30  800  5.73 4.569 922 forty two
G2530 3.800.000 7.600.000 660.000  1  1  634  475-800 600  30  850  7.52 5.987 one.455 50

Anything want you should see our world wide web website http://

/ The use of authentic tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the listed alternative parts contained herein are not sponsored, accepted, or manufactured by the OEM. /

Gear China in Barquisimeto Venezuela (Bolivarian Republic of) ameridrive coupling supplier Coupling in Malappuram India full gear coupling factory Giicl Series with top quality lowest price