Overview of 1B68SDS Sheave
1B68SDS sheave is a single-groove sheave that has a diameter of 7.15 inches and is designed to work with SDS bushings. QD style sheaves, like the 1B68SDS, offer a wider range of bore sizes, making them more versatile than standard bore style sheaves. They are a two-component part, so if one component fails, the entire part doesn’t need to be replaced. These sheaves are manufactured from durable cast iron, are dynamically balanced at the factory, and are phosphated then painted for increased corrosion resistance.
Dimensions of the 1B68SDS Sheave
The 1B68SDS sheave has the following dimensions:
- Size: 1B68SDS
- Bushing Type: SDS
- Bore Range: 1/2″ – 2″
- Type: C
- Pitch Diameter (B/5L): 6.8″
- Pitch Diameter (A/4L): 6.4″
- Outside Diameter (O.D.): 7.15″
- Dimension (E): 11/32″
- Dimension (F): 7/8″
- Dimension (L): 1-5/16″
- Dimension (M): 3/32″
- Sheave Weight: 7.5 lbs
Common Usage Scenarios of the 1B68SDS Sheave
The 1B68SDS sheave is widely used in various industrial applications like conveyor systems and agricultural machinery. It is commonly used to transfer power from the motor to the equipment or to transfer torque between shafts.
Benefits of Using the 1B68SDS Sheave
- Wider range of bore sizes
- Durable cast iron material
- Dynamically balanced at the factory
- Phosphated and painted for increased corrosion resistance
Materials that can be Used with the 1B68SDS Sheave
The 1B68SDS sheave is designed to work with SDS bushings, which come in a variety of materials like stainless steel, carbon steel, and plastic. The sheave can also be used with various types of belts like A, 4L, B, 5L, AX, BX, AA, and BB belts.
How to Install, Maintain, and Repair the 1B68SDS Sheave
To install the 1B68SDS sheave, first, make sure that the shaft and bushing are clean and free of any debris. Then slide the bushing into the sheave’s bore and tighten the screws to secure it in place. To maintain the sheave, periodically check for any signs of wear or damage and replace the sheave or bushing if necessary. To repair the sheave, remove the damaged bushing and replace it with a new one.
How to Replace the 1B68SDS Sheave
To replace the 1B68SDS sheave, first, remove the belt from the sheave. Then remove the screws that secure the bushing to the sheave and slide the bushing out. Finally, slide the sheave off the shaft and replace it with a new one.
EVER-POWER GROUP’s Products
EVER-POWER GROUP is a leading manufacturer and distributor of high-quality chain and sprocket products. We offer an extensive inventory, competitive prices, and fast response times. We sell to end users, distributors, and OEMs all around the world. We provide customized products based on samples or pictures. Visit our website or contact us for more information.
FAQs
- What is the 1B68SDS sheave made of?
- The 1B68SDS sheave is made of durable cast iron material.
- What is the difference between QD style sheaves and standard bore style sheaves?
- QD style sheaves offer a wider range of bore sizes, making them more versatile than standard bore style sheaves. They are a two-component part, so if one component fails, the entire part doesn’t need to be replaced.
- What types of belts can the 1B68SDS sheave be used with?
- The 1B68SDS sheave can be used with A, 4L, B, 5L, AX, BX, AA, and BB belts.
- What is the weight of the 1B68SDS sheave?
- The 1B68SDS sheave weighs 7.5 lbs.
- What are some common usage scenarios for the 1B68SDS sheave?
- The 1B68SDS sheave is widely used in various industrial applications like conveyor systems and agricultural machinery. It is commonly used to transfer power from the motor to the equipment or to transfer torque between shafts.
Note: All the content of this page is from the Internet. The content is only for reference for product selection. We are not the original trademark holder. Our products are only applicable to aftermarket replacement parts rather than original parts. If you need to buy original spare parts, please contact the original factory to buy.