All content is from the network
This article is intended to serve as a reference for product selection only. Our products are replacement parts, not original spare parts, and we are not the holder of the original trademark of the content. If you need to purchase original spare parts, please contact the original factory to buy.
Hydraulic PTO Gearbox for Team two Pump, Ratio one:three:8 with Woman Shaft, Quick Fitting
Our Hydraulic PTO Gearbox is specifically designed to connect gear pumps to farm tractor power take offs (PTO). The PTO Gearbox is capable of an output speed of 540 RPM, which can be compared with the appropriate operating speeds of hydraulic pumps. Various input handling speeds are also compatible, provided that the PTO gearbox output velocity does not exceed 3000 RPM.
The gearbox housing is produced in shell-forged aluminum or high mechanical resistance forged iron. The gears are made to ISO/DIN 3990-88 specifications and are made of steel UNI 18 PCR M03. The stub tooth design ensures high resistance and quiet operation. The shafts are made of steel UNI 16 CRN4 and are coupled with splined gears. They are designed to withstand the torque values mentioned in the catalogue.
Technical Specifications
- Optimum ongoing torque of the PTO Gearbox (Enter aspect daNm): 15.9
- Optimum continuous torque of the PTO Gearbox (Output aspect daNm): 4.2
- Tractor output speed: 540 RPM
- Ultimate output velocity of pump/gearbox assembly: 2052
- Ratio of velocity increase: 3.8
- Max transmittable power: 10kw
- Max oil level: 0.22 litres
- Weight: 5kg
The torque figures mentioned in the technical charts of all the PTO Gearboxes refer to continuous duty cycles. Torques under intermittent operating conditions can be exceeded by 20%. SAE 90 gear oil must be put in the PTO gearbox before use, and the oil should be changed after the first 60-80 hours and then every 12 months or 1500 hours, whichever comes first.
Applications and Benefits
Our Hydraulic PTO Gearbox is widely used in agricultural machinery, forestry machinery, garden machinery, engineering machinery, petroleum machinery, mining machinery, and other industries. The gearbox is widely popular due to its high-quality design, favorable price, and considerate service. Our product can be customized according to pictures or samples, and we welcome customers to visit us.
The gearbox is made of high-quality materials such as shell-forged aluminum and high mechanical resistance forged iron. The gears are made to ISO/DIN 3990-88 specifications and are made of steel UNI 18 PCR M03, which ensures high resistance and quiet operation. The shafts are made of steel UNI 16 CRN4 and are coupled with splined gears, which ensures that they can withstand the torque values mentioned in the catalogue.
Installation, Maintenance, and Repair
Installation of the Hydraulic PTO Gearbox is relatively simple and can be done by following the instructions provided in the user manual. The gearbox should be checked for oil level through the oil window every 50 hours. The working temperatures should not exceed 120 degrees Celsius under continuous duty cycle.
Maintenance of the gearbox is critical to ensure its long-term operation. The oil should be changed after the first 60-80 hours and then every 12 months or 1500 hours, whichever comes first. In the event of a gearbox failure, repair should be carried out by a qualified technician.
FAQs
- What is the maximum transmittable power of the Hydraulic PTO Gearbox?
- What is the weight of the Hydraulic PTO Gearbox?
- What is the output speed of the Hydraulic PTO Gearbox?
- What is the housing of the Hydraulic PTO Gearbox made of?
- What is the material of the gears in the Hydraulic PTO Gearbox?